Tractor nuevo Landini 5-100
Publicado: 5mes(es) 30d.
Publicado: 5mes(es) 30d.
¿Necesitas envío?
Cylindrate: 3,6 / 4
-
Transmission: Speed Four + T-Tronic
-
Landini 5-100
Landini 5-100 Landini 5 Series Tractors, Capable of Surprising
With performance comparable to that of higher-class machines, the new 5 Series tractor is a utilities truly versatile: perfect for open field work, such as plowing, tilling and harrowing; agile in planting and managing the haymaking cycle; safe in the barn and in transport. Built to do every job with maximum efficiency, the 5 Series is distinguished by automotive-level comfort.
Total View Slim Cabin
Less tiring work days and more productivity: this has been achieved by the new Landini 5 Series, thanks in part to the suspended cab Total View Slim and the suspended front axle. Solutions that isolate the operator from jolts and vibrations generated by rough terrain. In addition, the new soundproofing system further reduces external noise. Every element of the Total View Slim cab is designed to increase comfort: the spaces are large; the floor is flat; the seat can have air suspension; the steering wheel is reclining and telescoping, with integral dashboard; the controls are ergonomic and intuitive; the equipment is automotive-grade; and the air conditioning, located in the Slim roof, provides an ideal year-round working environment. The cab's 4-pillar structure maximizes glazing to provide a 360-degree panoramic field of view and facilitate work done in tight spaces where excellent short-range visibility is needed. Up to 10 LED headlights perfectly illuminate the area during night work. The transparent roof hatch allows a full view while using the front loader.
FPT F36 engine, for maximum efficiency at all times
In the context of the new emission regulations Stage V / Tier 4 Final, Landini has redesigned the engine/transmission combination of the 5 Series to keep efficiency and performance at the highest level. The exhaust treatment system is not on the right-hand pillar of the cab, but has been placed under the hood to safeguard full visibility while working. The new 5 Series is equipped with engines FPT F36, 4-cylinder, 16-valve, 3.6-liter, Turbo Intercooler with Common Rail electronic injection, from 95 hp, 102 hp and 114 hp. With DOC / DPF / SCR technology, it meets Stage V / Tier 4 Final regulations.
Configurable transmission tailored to any need
Otto are the possible configurations of the transmissions, to meet the specific needs of each farm:
1. Speed Four: 12 AV + 12 RM, with mechanical shuttle.
2. Speed Four: Super Reducer 24 AV + 24 RM, with mechanical shuttle.
3. Hi-Lo hydraulic Power Four: 24 AV + 24 RM, with mechanical shuttle.
4. Hi-Lo hydraulic Power Four: Super Reducer 32 AV + 32 RM, with mechanical shuttle.
5. Hi-Lo hydraulic Power Four: 24 AV + 24 RM, with hydraulic shuttle.
6. Hi-Lo hydraulic Power Four: Super Reducer 32 AV + 32 RM, with hydraulic shuttle.
7. H-M-L T-Tronic: 36 AV + 12 RM, with hydraulic shuttle.
8. H-M-L T-Tronic: Super Reducer 48 AV + 16 RM, with hydraulic shuttle
Landini has further refined transmissions that already have great strength and reliability to increase their efficiency even more in terms of power transmitted and lower fuel consumption.
New hydraulic circuit for higher productivity
The open-center hydraulic circuit of the new 5 Series can have up to 3 pumps, with a scope of 82 l/min. This increased hydraulic capacity enables:
Speeding up processing
Perform multiple operations simultaneously
Perform more strenuous work
Decrease fuel consumption as the engine operates at a lower RPM
Increase comfort and decrease fatigue, because operating at a lower RPM reduces vibration and noise
Always bend lightly, even during heavy work, thanks to the dedicated steering pump with 32 l/min flow rate
Up to 6 hydraulic distributors can equip the 5 Series. Of these, 3 are mechanically controlled, 1 is electronically operated and, as an option, 2 ventral distributors connect implements such as the front loader. As an option, 1 flow selector doubles the distributor to which it is coupled. There are 4 types of distributors, which can be combined according to different working needs: - Standard: double-acting. - Kick-out: with automatic release. - Floating: for implements that follow the contour of the ground. - Hydraulic/floating motor: for the use of tools that require it
¿Necesitas envío?
Obtenga una cotización de envío
¿Necesitas envío?
Obtenga una cotización de envío